What is batten board and siding? (with photos)

Board and batten flooring is believed to have originated in Sweden and Norway.

Board and clapboard siding is often called board and blanket, or barn siding. It is a type of rustic wood siding often found in more rural areas, in country houses, barns and other outbuildings. Board and clapboard siding consists of wide boards laid vertically with narrower strips of wood, called slats, covering the gaps. This type of siding is believed to have originated in Sweden and Norway, and became popular in North America in the mid-19th century.

Hemlock is considered a high quality lumber.

The boards that make up the board and batten covering can vary greatly in width. On average, they are usually around 20 centimeters wide. They can, however, be up to 30.5 centimeters wide and 15 centimeters wide. The thickness of these boards is usually not less than 2.5 centimeters thick, since thinner boards typically don’t hold up in the elements either.

Board and batten siding can be found in barns.

When the boards are attached to the side of the building, a space of about 2.5 centimeters is left between them. These gaps are then covered by narrow strips of wood called battens. Depending on the width of the boards used for the panel and slat siding, the width of the slats may vary. Wider boards usually have wider spaces between them, which can be covered by battens up to 10 centimeters wide. On the other hand, narrower boards often have smaller gaps between them, and these gaps are covered by slats up to 3/4 of an inch (2 centimeters).

See also  What is a Dishwasher Motor? (with photo)

While several different woods are used for board and batten siding, cedar seems to be one of the most popular choices. The reason for this is that cedar has a natural resistance to decay, which makes it extremely durable. Other popular wood choices for board and clapboard siding include poplar, pine, oak, and hemlock.

Regardless of the type of wood used for the board and batten cladding, it will need to be treated to help it withstand the elements. Although wood is very durable, it can be susceptible to rot and decay. To avoid this, it is highly recommended to treat the wood with water repellent, dye or paint.

The maintenance of wood siding also differs from other types of siding, such as brick siding or aluminum siding. Unlike other exterior cladding, wood usually needs to be removed, stained or repainted every five to seven years. In wetter climates, it may have to be done more often. The board and batten flooring should be inspected at least once a year for damaged, cracked, or rotting boards. To prevent further damage, these boards should be replaced as soon as possible.

Leave a Comment