What are the common causes of socket error 10061?

A socket error 10061 is a connection refused or forcibly denied. While this error can technically be seen on any type of server connection, it is more common when a user tries to connect to an email server. There are many reasons for a socket error 10061. A firewall could be blocking the connection, the service could be unavailable, the server program that makes the server work could be down or shut down, the servers could be overloaded, or the ports could be blocked . Each cause has a different fix that should allow the user to connect to the server.

man holding computer

Socket error code 10061 can appear whenever a user connects to a server. This is seen most often with email servers, because the most common server connection users encounter is one used with an email service. Computers that connect to other servers, such as for business use, may also experience this issue. Regardless of how the error is caused, it still has the same common causes and fixes.

A firewall blocking the connection and causing a socket error 10061 is the easiest to fix. Firewalls prevent malicious code or connections from occurring, but a firewall sometimes gets confused and also blocks good connections. This usually happens if the user is connecting to a server for the first time or if the firewall was recently reset. In this case, the user must list the server as friendly or turn off the firewall. If the firewall needs to be turned off, the user must turn it back on after the connection to the server is terminated.

See also  What causes the computer to crash?

Another cause for a socket error 10061 is a blocked port or ports. Ports need to be open for sockets to connect. Each server will require a different port and each program will have a different way of opening ports. To fix this error, the user should contact the server’s customer service to see which ports are needed and read the user manual or speak to customer service about opening the specified port(s) ( s).

The other causes, which cannot be controlled by the user, include a server unavailable, the server program not working, and the server being overloaded. In such cases, the server must be repaired or powered on, or the user must wait until peak occupancy stops and bandwidth is freed up. In this case, the user can wait from a few minutes to a few hours; on catastrophic instance days, you may need to connect to the server.

Leave a Comment