How do I balance a washing machine? (with photos)

Concrete is the best surface for a front loading washing machine.

There are a few different ways to balance a washing machine, but in most cases you will want to determine what is causing the instability; fixing this will usually resolve the issue. Balance problems with washing machines tend to be the easiest to resolve, and most of the time they are temporary. The first thing you should do is make sure you are not overloading the machine. Even though lots of clothes and other items can fit in the sink, they all need space to rotate freely. You should also make sure the machine is level and check the fidelity and tightness of the drum screws. It is also usually a good idea to observe how the machine is placed on the ground. If the feet are not level or the washer is on a rickety or worn platform, it may be necessary to provide a more stable base.

Understanding balance in general

An unbalanced washing machine does not wash clothes efficiently.

The first thing most people notice about an unbalanced washing machine is that it shakes and shakes violently during the wash cycle. Ideally, machines should clean clothes and other materials silently. Some noise and vibrations are to be expected, of course, but in situations of true imbalance, the problem is often very noticeable – and if not corrected, it can lead to more serious problems. The longer a washing machine is left to bang and roll, the more likely it is that other internal components will wear out and malfunction. Checking and correcting your balance is usually something you can do unaided.

See also  What is dolomitic limestone? (with photos)

Important safety precautions

As far as washing machines are concerned, balance problems are relatively easy to solve.

Before starting, it is important that you turn off the machine and unplug it from the outlet. Unplugging the power from your home’s fuse box outlet is another option. For security reasons, it is important that any machine you are investigating is solidly disconnected from power before starting. Leaving him “alive” can harm you or him.

check the load

Once the area is secure, you can start balancing a washing machine by checking the wash load to see if it is causing the problem. Heavy or unusually large loads are often to blame. If a load is in progress, open the washing machine lid or door and redistribute the items inside. If redistributing the contents and restarting the machine does not resolve the issue, remove some clothing, as smaller loads are less likely to become unbalanced.

Make sure the machine is level

The problem could also be that the machine is not level. You can easily check this by placing a carpenter’s level against the machine. If the reading shows tilt, check that the feet are adjustable and that they are all at the same height. Adjusting the feet until the machine is level can be a good option. If you can’t adjust your feet, try putting a piece of foam or rubber under the foot that seems to have the problem.

Evaluate drum screws

The compartment inside the washing machine where the clothes are placed is called the drum. Many machines have a weight attached to this drum, designed to avoid too much vibration. Check if the drum bolts are loose and if so, tighten them with a wrench. This is particularly important if your machine is new. Many new washers are not properly tightened at the factory, and you may also find packing materials or stabilizers on the drum that must be removed before use. A restraining bolt usually holds the drum in place during transport, for example, and if not removed, it can cause problems. Check the drum for screws or clips and make sure nothing is blocking the movement.

See also  What are the different types of ceiling tiles? (with photos)

Consider Floor Reinforcements

The best surface for a washing machine, especially a front loader, is a concrete floor. Washing machines can get very heavy due to the weight of the water. If the machine is not on concrete, you may want to reinforce the floor joists, if possible, which can help balance a washing machine placed on a floor that has caved in. If your machine is on a pedestal, you may need to think about replacing or repairing it as well. You might consider calling a professional to take a look at it if you can’t solve the problem yourself. The problem may be more than just a balance issue, and in these cases, it’s best to get someone with more experience to assess the situation.

Leave a Comment